ps快捷键选定区域 | ps快捷键选定
800 2023-04-02 04:06:03
将所选代码行注释:先Ctrl+K,再Ctrl+C 取消代码行注释:先Ctrl+K,再Ctrl+U
一般来讲有两种:
一是单行注释:直接在该行需要注释的地方加上"//"就行了。例如:"int a,b;//这是一个注释行"。那么,"//"后面的部分"这是一个注释行"就被注释掉了,不起作用,但是"//"前面的“int a,b;"不受影响。
另外还有一种是多行同时注释:/*int a,b;int c,d;*/其中"/*"和"*/"起限定范围的作用,该范围内的语句都会被注释掉,将不再起作用。当然,多行注释也是可以用来单行注释的
1.选中 直接点击工具栏上边的注释2.选中要注释的代码,然后快捷键 Ctrl+E,C
1.中文字符占两个字符,操作过程可能只删除了半个字符,导致了乱码;
2.看看不是注释的地方有没有是中文字符的空格啥的;
3.遇到这种情况,一般我是拷贝一下乱码行到记事本,然后把乱码行重新写下看看,反正倒腾下说不定就好了,有时是多加个空行,或删个空行啥的。
可以用两个反斜杠//,这是单行注释。
还有一个是/*…*/,这是多行注释。
c程序加//是错的。
c++加//是注释,C用/**/。
如果你是用VC, //就是注释作用,是不参与编译的。
如果VC编译器出现如此错误提示"stray '\161'in progtam",说明你用了全角符号的空格。
直接从网上拷贝代码贴到Dev C++中会经常遇到 stray '\161' in program 错误,其实问题出在代码中掺入了一些不合法的空格(全角空格),把每行代码后的空格删掉即OK了!
C语言错误对照表:
1. Ambiguous operators need parentheses — 不明确的运算需要用括号括起
2. Ambiguous symbol 'xxx' — 不明确的符号
3. Argument list syntax error — 参数表语法错误
4. Array bounds missing — 丢失数组界限符
5. Array size toolarge — 数组尺寸太大
6. Bad character in paramenters — 参数中有不适当的字符
7. Bad file name format in include directive — 包含命令中文件名格式不正确
8. Bad ifdef directive synatax — 编译预处理ifdef有语法错
9. Bad undef directive syntax — 编译预处理undef有语法错
10. Bit field too large — 位字段太长
11. Call of non-function — 调用未定义的函数
12. Call to function with no prototype — 调用函数时没有函数的说明
13. Cannot modify a const object — 不允许修改常量对象
14. Case outside of switch — 漏掉了case 语句
15. Case syntax error — Case 语法错误
16. Code has no effect — 代码不可能执行到
17. Compound statement missing{ — 分程序漏掉"{"
18. Conflicting type modifiers — 不明确的类型说明符
19. Constant expression required — 要求常量表达式
20. Constant out of range in comparison — 在比较中常量超出范围
21. Conversion may lose significant digits — 转换时会丢失意义的数字
22. Conversion of near pointer not allowed — 不允许转换近指针
23. Could not find file 'xxx' — 找不到XXX文件
24. Declaration missing ; — 说明缺少";"
25. Declaration syntax error — 说明中出现语法错误
26. Default outside of switch — Default 出现在switch语句之外
27. Define directive needs an identifier — 定义编译预处理需要标识符
28. Division by zero — 用零作除数
29. Do statement must have while — Do-while语句中缺少while部分
30. Enum syntax error — 枚举类型语法错误
31. Enumeration constant syntax error — 枚举常数语法错误
32. Error directive :xxx — 错误的编译预处理命令
33. Error writing output file — 写输出文件错误
34. Expression syntax error — 表达式语法错误
35. Extra parameter in call — 调用时出现多余错误
36. File name too long — 文件名太长
37. Function call missing ) — 函数调用缺少右括号
38. Fuction definition out of place — 函数定义位置错误
39. Fuction should return a value — 函数必需返回一个值
40. Goto statement missing label — Goto语句没有标号
41. Hexadecimal or octal constant too large — 16进制或8进制常数太大
42. Illegal character 'x' — 非法字符x
43. Illegal initialization — 非法的初始化
44. Illegal octal digit — 非法的8进制数字
45. Illegal pointer subtraction — 非法的指针相减
46. Illegal structure operation — 非法的结构体操作
47. Illegal use of floating point — 非法的浮点运算
48. Illegal use of pointer — 指针使用非法
49. Improper use of a typedefsymbol — 类型定义符号使用不恰当
50. In-line assembly not allowed — 不允许使用行间汇编
51. Incompatible storage class — 存储类别不相容
52. Incompatible type conversion — 不相容的类型转换
53. Incorrect number format — 错误的数据格式
54. Incorrect use of default — Default使用不当
55. Invalid indirection — 无效的间接运算
56. Invalid pointer addition — 指针相加无效
57. Irreducible expression tree — 无法执行的表达式运算
58. Lvalue required — 需要逻辑值0或非0值
59. Macro argument syntax error — 宏参数语法错误
60. Macro expansion too long — 宏的扩展以后太长
61. Mismatched number of parameters in definition — 定义中参数个数不匹配
62. Misplaced break — 此处不应出现break语句
63. Misplaced continue — 此处不应出现continue语句
64. Misplaced decimal point — 此处不应出现小数点
65. Misplaced elif directive — 不应编译预处理elif
66. Misplaced else — 此处不应出现else
67. Misplaced else directive — 此处不应出现编译预处理else
68. Misplaced endif directive — 此处不应出现编译预处理endif
69. Must be addressable — 必须是可以编址的
70. Must take address of memory location — 必须存储定位的地址
71. No declaration for function 'xxx' — 没有函数xxx的说明
72. No stack — 缺少堆栈
73. No type information — 没有类型信息
74. Non-portable pointer assignment — 不可移动的指针(地址常数)赋值
75. Non-portable pointer comparison — 不可移动的指针(地址常数)比较
76. Non-portable pointer conversion — 不可移动的指针(地址常数)转换
77. Not a valid expression format type — 不合法的表达式格式
78. Not an allowed type — 不允许使用的类型
79. Numeric constant too large — 数值常太大
80. Out of memory — 内存不够用
81. Parameter 'xxx' is never used — 能数xxx没有用到
82. Pointer required on left side of -> — 符号->的左边必须是指针
83. Possible use of 'xxx' before definition — 在定义之前就使用了xxx(警告)
84. Possibly incorrect assignment — 赋值可能不正确
85. Redeclaration of 'xxx' — 重复定义了xxx
86. Redefinition of 'xxx' is not identical — xxx的两次定义不一致
87. Register allocation failure — 寄存器定址失败
88. Repeat count needs an lvalue — 重复计数需要逻辑值
89. Size of structure or array not known — 结构体或数给大小不确定
90. Statement missing ; — 语句后缺少";"
91. Structure or union syntax error — 结构体或联合体语法错误
92. Structure size too large — 结构体尺寸太大
93. Sub scripting missing ] — 下标缺少右方括号
94. Superfluous & with function or array — 函数或数组中有多余的"&"
95. Suspicious pointer conversion — 可疑的指针转换
96. Symbol limit exceeded — 符号超限
97. Too few parameters in call — 函数调用时的实参少于函数的参数不
98. Too many default cases — Default太多(switch语句中一个)
99. Too many error or warning messages — 错误或警告信息太多
100. Too many type in declaration — 说明中类型太多
101. Too much auto memory in function — 函数用到的局部存储太多
102. Too much global data defined in file — 文件中全局数据太多
103. Two consecutive dots — 两个连续的句点
104. Type mismatch in parameter xxx — 参数xxx类型不匹配
105. Type mismatch in redeclaration of 'xxx' — xxx重定义的类型不匹配
106. Unable to create output file 'xxx' — 无法建立输出文件xxx
107. Unable to open include file 'xxx' — 无法打开被包含的文件xxx
108. Unable to open input file 'xxx' — 无法打开输入文件xxx
109. Undefined label 'xxx' — 没有定义的标号xxx
110. Undefined structure 'xxx' — 没有定义的结构xxx
111. Undefined symbol 'xxx' — 没有定义的符号xxx
112. Unexpected end of file in comment started on line xxx — 从xxx行开始的注解尚未结束文件不能结束
113. Unexpected end of file in conditional started on line xxx — 从xxx 开始的条件语句尚未结束文件不能结束
114. Unknown assemble instruction — 未知的汇编结构
115. Unknown option — 未知的操作
116. Unknown preprocessor directive: 'xxx' — 不认识的预处理命令xxx
117. Unreachable code — 无路可达的代码
118. Unterminated string or character constant — 字符串缺少引号
119. User break — 用户强行中断了程序
120. Void functions may not return a value — Void类型的函数不应有返回值
121. Wrong number of arguments — 调用函数的参数数目错
122. 'xxx' not an argument — xxx不是参数
123. 'xxx' not part of structure — xxx不是结构体的一部分
124. xxx statement missing ( — xxx语句缺少左括号
125. xxx statement missing ) — xxx语句缺少右括号
126. xxx statement missing ; — xxx缺少分号
127. xxx' declared but never used — 说明了xxx但没有使用
128. xxx' is assigned a value which is never used — 给xxx赋了值但未用过
pycharm批量注释的快捷键:
代码选中的条件下,同时按住 Ctrl+/,被选中行被注释;
再次按下Ctrl+/,注释被取消
其他一些快捷键:
Ctrl+d 复制当前行、或者选择的块
Ctrl+n 跳转到类
Ctrl+shift+n 快速查找文件名
Ctrl+shift+f 全局查找,快速查找关键字的文件
Ctrl+shift+r 全局替换
Ctrl+鼠标左键 查看源代码
Ctrl+alt+方向左右键 看源码的时候前进返回
Ctrl+a 全选
ctrl+alt+l 格式化代码
Alt+enter 自动导入包
Tab 多行同时向后移动
shift+tab 与Tab相反
alt+选中像notepad++多行操作
Ctrl+c 复制当前行或选定的代码块到剪贴板
Ctrl+x 剪切当前行或选定的代码块到剪贴板
Ctrl+v 粘贴
这种说法是对的。
C语言有两种注释方式,一种是以/*开始,以*/结束的块注释;另一种是以//开始,以换行符结束的单行注释。
在编写C语言源代码时,应该多使用注释,这样有助于对代码的理解。
可以使用/*和*/分隔符来标注一行内的注释,也可以标注多行的注释。
可以使用//插入整行的注释,或者将源代码写成两列分栏的格式,程序在左列,注释在右列。